The Carbon Clearing : Suzuki Aerio 2.3 L 155 hp Gas
Prevents residue from forming on valves, injectors, spark plugs
1 - Carbon Cleaningmachine
Using our unique hydrogen-powered decarbonizing machine, a technician at our Carbon Cleaning center will remove nearly all carbon build-up. in just 30 minutes, your engine will run like new.
The Carbon Cleaning machine has a remarkable cleaning capacity. With this advanced technology, developed over several years, hydrogen is pulsed through the air intake pipes, burning off up to 75% of the carbon deposits that prevent your engine from running smoothly.
2 - How does it work?
The Carbon Cleaning decarbonization station is easy to use, fast, efficient, and completely autonomous. The station automatically manages the pulsed hydrogen flow.
The heating effect of hydrogen makes it possible to raise the combustion temperature to trigger a pyrolysis, essentially a chemical reaction that serves to remove, burn off, disintegrate, and eliminate carbon deposits. To install, simply insert the hose of the Carbon Cleaning station into the air intake duct and then connect the clamps on to the positive and negative terminals of the vehicle’s battery. By activating the timer, you have the ability to choose the duration of the cleaning, which varies according to the contamination level of the vehicle. While the machine is operating, please allow the vehicle to idle.
3 - The Hydrogen
Although it is abundant in the universe, hydrogen is a gas usually found combined with other atoms, most commonly as an element in water, oil, and natural gas. Hydrogen is considered as an energy vector, used mainly in chemicals, refining, or industry. But in these days of environmental concern, hydrogen is seen as a having a lot of potential to play a major role in the future energy landscape. Hydrogen has a very high energy density, i.e., it harbors a lot of energy in a small mass.
4 - The benefits of hydrogen in the combustion process
Hydrogen is characterized by a high reactivity and a combustion rate as much as five times greater than that of fuel. Moreover, hydrogen has a wider flammability range than other types of fuel. Due to these characteristics, the addition of even a small amount of hydrogen in the fuel-air mixture increases the combustion rate thus making the combustion more stable by reducing the duration of combustion and reducing cycle-to-cycle variations.
Many quantitative and experimental studies done on the impact of adding hydrogen in internal combustion engines (based on gas or diesel) have come to the common conclusion that the measure:
- reduces the duration of the combustion process
- increases thermal efficiency
- burns off, disintegrates, and removes carbon deposits
And finally, for best results, we recommend you go for a 25 to 30-minute drive in low gear (above 3000 r/min) after the Carbon Cleaning session in order to remove the last remaining residue from the exhaust.
As a preventative measure, decarb your vehicle every 15,000 km or once a year.
The Carbon Cleaning ?
Prevents maintenance on engine problems
Preventive engine cleaning enables you to restore engine parts rather than replacing them, thereby saving vehicle owners on costly parts, such as a new turbocharger ($ 1.350 - 3.100), catalytic converter ($ 600 - 2.000), DPF ($ 600 - 2.000) or EGR valve ($ 370 - 500).
These problems result mainly from poor combustion, which stifles the engine.
So before replacing your engine parts, try Carbon Cleaning. A dirty engine as the result of carbon deposits is the new threat to vehicle performance.
With the Carbon Cleaning solution,
you can help extend the life of your car engine
without the need to replace so many expensive parts.
Become a distributor-partner of Carbon Cleaning
As a member of the Carbon Cleaning network,
you are an independent vendor. To help you grow
your business, we put all of our experience and expertise
at your disposal.
Contact us with any questions
or for more information about how to become a partner.